Change settings of CentOSBE

Summary

The settings in the CentOS BE (Boot Environment) in AIP2018, based on LiveDVD of CentOS 7.3 / CentOS 7.4, can be changed

– Switch input languages

By default, the input language is US English, which makes operation inconvenient as the key array differs at the time of command execution.

Steps
1) Quit the console.

Click “Open Terminal” from the Console — Utilities.
After starting the terminal, execute the following command to terminate the console.

# killall AIProtector

2) Change the CentOSBE setting.

From the upper left menu, Applications — System Tools — Settings — Region & Language — Input Sources — press the [+] button .
Please add any language.
Please switch as shown.

3) Start the Console.

# /opt/BE/AIProtector

– Time zone switching

The time zone is set automatically by default, but it will be set to UTC in environments where there is no internet access.

Steps
1) Quit the console.

Click “Open Terminal” from the console utility.
After starting the terminal, execute the following command to end the console.

# killall AIProtector

2) Change the CentOSBE setting.

From the upper left menu, Applications — System Tools — Settings — Date & Time — Turn off Automatic Time Zone.
Use the time zone button to change to another time zone button.

3) Start the Console.

# /opt/BE/AIProtector