Knowledge Base
- Deploy USB doesn't recognize all USB HDDs when multiple devices with the same serial number are connected simultaneously
- After a patch or upgrade, the "Changed Block Tracking Mode" in [Preference] - [Backup Settings] resets to the default "Tracking Driver Mode"
- The ImageCast client PC is running Windows, but its status shows as "Offline"
- When importing Deploy target list, the client label name is not loaded
- The requirements for enabling [Shut-down Windows system using authentication information]
- Updating Deploy target list
- When PXE Deploy settings are changed during the casting process
- Client Label
- Shut down the ImageCast client PC
- Exclude client PC from Deployment target
- Switching PXE mode
- iPXE in Hyper-V environment
- Behaviors of PXE Deploy
- The processes for PXE
- Boot multiple client PCs simultaneously using PXE
- Shut down PXE client on local PC
- If no DHCP server is on the network
- Recommended operating environment for PXE Deploy feature
- The ImageCast Server computer's NIC has a fixed IP address
- PXE Deploy on a multi-network-connected computer
- PXE boot fails despite the correct settings on the client computer
- The deployment process stalls and stops progressing, even after waiting
- Updating PXE boot image（Windows RE/ADK）
- When multiple Deploy Media are connected, none of them are prioritized or selected
- Supported 4K sector hard drive
- The image casting process is slow
- Connect ImageCast client computers to the network to deploy a source image
- Clicking the "i" icon shows the Rapid Deploy USB media comment at the top of the console window
- If a network error happens while casting an image to multiple ImageCast client PCs
- About PXE Boot and Wake on LAN feature